Strain wave Gear aka Harmonic drive
Posted: Fri Feb 12, 2021 10:17 am
Art I hope you will take a look at this web site where a guy designed a 3d printed harmonic drive gearbox. I am working on a scara robotic arm for a kinetic art project. https://howtomechatronics.com/how-it-wo ... ment-10963
While his design works well being 3d printed I hope that you can come up with a better design. It is a bit on the large size. I was surprised at how well the flex spline worked being 3d printed.Also I would like to see a 100:1 ratio. Here is a link to the gearbox running. https://youtube.com/watch?v=2weqGRR5ivc
While his design works well being 3d printed I hope that you can come up with a better design. It is a bit on the large size. I was surprised at how well the flex spline worked being 3d printed.Also I would like to see a 100:1 ratio. Here is a link to the gearbox running. https://youtube.com/watch?v=2weqGRR5ivc