The Albert
Posted: Thu Feb 08, 2018 10:56 am
As I got some nice feedback from the acrylic clock I recently built. I thought I would put up my home designed pendulum clock. This was created using gearotics and I designed my own escapement using an Arduino and a LED gate. The pendulum is driven by a motor that provides an impulse only on the right to left swing. All other gears were made with a milling machine and a turntable driven by a wonderful controller called Division Master. The time keeping is awful!! But this was my first completely designed clock. With my laser cutter I am now looking to design one with much greater precision. Will post progress.
Regards to all
Jonathan
Regards to all
Jonathan