Welcome to Tickers..

Files, photos and discusions on Tickers and kinetic devices.
John T
Old Timer
Posts: 447
Joined: Tue Oct 05, 2010 9:53 am

Re: Welcome to Tickers..

Post by John T »

Hi Art,
Here's my go at a ticker.  I've used the dimensions of Scimitar with respect to the gears and the ratchet mechanism.
I don't use bearings just steel on wood and I usually use 1/8" shafts.
All the parts are cut from 1/4" baltic birch and the visual part is just a simple interference pattern from 10" toothless wheels.  It works great on the test bench.

I had to clean (snow blow) about 1 Km of road to get to my CNC which is at the summer cottage where my CNC lives but it was worth the effort.

The Ticker is certainly not finished as the back is just solid wood and that will change in the future but my time has run out.

When finished it will be a shelf unit - no wall space left.

John
Attachments
IMG_3600.JPG
1% inspiration 99% try, try again
User avatar
ArtF
Global Moderator
Global Moderator
Posts: 4586
Joined: Sun Sep 05, 2010 6:14 am
Contact:

Re: Welcome to Tickers..

Post by ArtF »

John:
Nicely cut. I see some awfully small spokes in there somewhere. :)

Art
BobL
Global Moderator
Global Moderator
Posts: 466
Joined: Sun Sep 05, 2010 7:18 am

Re: Welcome to Tickers..

Post by BobL »

Nicely done John..
Please show a picture if you can when your done, would like to see results.


Cheers
Bob ;)
Gearotic Motion
Bob
John T
Old Timer
Posts: 447
Joined: Tue Oct 05, 2010 9:53 am

Re: Welcome to Tickers..

Post by John T »

Hi,
Yes there are some very small spokes in there I reduced the minimum size on pinion in GT that would still produce spokes (down to 1" if I remember correctly).  Its the same spoke pattern as on the drive wheel - just smaller.  Since my spindle is very small and driven by an RC motor I can't handle anything bigger than 1/8" cutter.  These components were all cut with a 1/16 router bit at 60 imp. 

I've had to leave the "bush" so it will be some time before I can go and play again but I will post when It gets done.  Ultimately it will be spring driven and I have no idea how long it will run. We'll see.


John
1% inspiration 99% try, try again
masterbrew
Old Timer
Posts: 5
Joined: Thu Sep 23, 2010 12:28 am

Almost complete

Post by masterbrew »

I had a little time last night and was able to get the vanes installed.
The vanes were styled after one Mr. Roy's pieces.
I think I will call this machine Sunset.

Randy
https://www.youtube.com/watch?v=HZArdOa9FZI

Last edited by masterbrew on Fri Feb 07, 2014 2:40 am, edited 1 time in total.
User avatar
ArtF
Global Moderator
Global Moderator
Posts: 4586
Joined: Sun Sep 05, 2010 6:14 am
Contact:

Re: Welcome to Tickers..

Post by ArtF »

Excellent job Randy. I like it.
Let us know how your family and friends react. I'm
curious about that. Yours looks as good as mine, and
Ive had great reaction, everyone seems to like it and get
mystified by it. On the other hand Ive heard
some say that their wives wouldn't allow it in the house.
  (My wife is pretty picky about decorating, but loves the ticker
and my first wooden clock. )

  I say hang it with pride, Ill bet you get hints about making one for others... :)

ARt
masterbrew
Old Timer
Posts: 5
Joined: Thu Sep 23, 2010 12:28 am

Wives

Post by masterbrew »

My wife vetoed the idea of putting it in the house.  She hates the click! 
I may just build one and put it on the bedroom wall  ;)
BobL
Global Moderator
Global Moderator
Posts: 466
Joined: Sun Sep 05, 2010 7:18 am

Re: Welcome to Tickers..

Post by BobL »

"I may just build one and put it on the bedroom wall"

LOL

Great job Randy, looks awesome and appears to work well too.. I agree, most who have seen it, wants one...

Cheers
Bob :)
Gearotic Motion
Bob
BillJ
Old Timer
Posts: 5
Joined: Sat Feb 01, 2014 4:19 pm

Re: Welcome to Tickers..

Post by BillJ »

Hello,

I made a 3D model to understand how it all goes together. I hope this helps clear up things a bit. I did make PDF?s but there are a few minor modifications as you can see in the video.

Also: Thanks to Ed R. for the help.

YouTube Title =  Scimitar 3D      http://www.youtube.com/watch?v=ooNUfhvE4xE

Best Regards,
BillJ
User avatar
ArtF
Global Moderator
Global Moderator
Posts: 4586
Joined: Sun Sep 05, 2010 6:14 am
Contact:

Re: Welcome to Tickers..

Post by ArtF »

Bill:

  Most excellent. Man, that was a lot of work, kudo's.. It probably clears up tons of questions
people might have. Thanks for the work, I do appreciate it.

Art
Ken_Shea
Old Timer
Posts: 122
Joined: Sat Oct 09, 2010 2:19 pm

Re: Welcome to Tickers..

Post by Ken_Shea »

That will save others a lot of thinking and guessing also a super nice job on both the modeling and the ticker.


BillJ
Old Timer
Posts: 5
Joined: Sat Feb 01, 2014 4:19 pm

Re: Welcome to Tickers..

Post by BillJ »

Thanks, I had an issue understanding some of it and Edward Ricci took the time to explain. Masterbrew offered to help as well. Masterbrew just completed his vanes and has a new video.

http://www.youtube.com/watch?v=HZArdOa9FZI  YT Title = Ticker with vanes , HD

I appreciate the plans Art and I hope you do more along with the others here. It takes as long to do a 3D Cad model like this as it would to actually build it. Ha! If I don?t do a cad project every once in a while I start to get rusty plus I always enjoy it.

Best Regards,
BillJ


BobL
Global Moderator
Global Moderator
Posts: 466
Joined: Sun Sep 05, 2010 7:18 am

Re: Welcome to Tickers..

Post by BobL »

Bill;

Outstanding  ...  Looks like the help you got made your work perfect... Great job...


Cheers
Bob
;D
Gearotic Motion
Bob
BillJ
Old Timer
Posts: 5
Joined: Sat Feb 01, 2014 4:19 pm

Re: Welcome to Tickers..

Post by BillJ »

Hey Bob,

Ha! - Yeah my help told me that until you have the parts in your hand it is hard to understand. That was a nice thing to tell me anyway.  :)

Here?s a couple of neat wood working videos that some of you might enjoy. They both use hand tool construction which is off topic but one is an artistic clock escapement. 

YT Title =  Organic Escapement #6 
http://www.youtube.com/watch?v=QTa_1OU-kgw

YT Title =  The Rocking Chair      http://www.youtube.com/watch?v=eGe2iGms ... 7jc043zxZw

Thanks,
Bill
BobL
Global Moderator
Global Moderator
Posts: 466
Joined: Sun Sep 05, 2010 7:18 am

Re: Welcome to Tickers..

Post by BobL »

Hi Bill;

I understand what your saying, often by seeing you can quickly relate to what's going on, that is the part I like most about your video, well done.... I also love the rocking chair build, however I'd be a bit concerned with the wood working mojo between an axe and I and to anyone around me.. lol


Thanks for sharing..

Cheers
Bob
;)
Gearotic Motion
Bob
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests