Dan:
Found it I think.. Ill release a fix soon, it explains the failure on the M calls.
I notice too, like m3, it fails to rewind if there is no following line, so Im tacking that down as well..
Art
Re: getting the 57cnc to work with G540
Re: getting the 57cnc to work with G540
Dan:
Rewind is fixed, download version 1.46 online now.
Thx for the bug
Art
Rewind is fixed, download version 1.46 online now.
Thx for the bug
Art
Re: getting the 57cnc to work with G540
Yes the M calls are all going now. I get no more crashes. SWEET.
Just noticed if I type 1000 at the FRO field.. the code runs fast, I mean fast. But even with a low jerk setting it seems it gets too quick around the corners.
f
Just noticed if I type 1000 at the FRO field.. the code runs fast, I mean fast. But even with a low jerk setting it seems it gets too quick around the corners.
f
Re: getting the 57cnc to work with G540
>>Just noticed if I type 1000 at the FRO field.. the code runs fast, I mean fast.
lol, Feedrate override is designed to be limited to 0 - 100 %, I didnt set a routine to clip it,
Im surprised it worked, but as it realy controls time, if over 100 you risk going too fast
for your system and Jerk will be 10 times more than set for example.. so I suppose if one
knows it will work you could go to liek 110% or may 140%, but 1000? ..yeah, that'd be fast
alright.. lol
Art
lol, Feedrate override is designed to be limited to 0 - 100 %, I didnt set a routine to clip it,
Im surprised it worked, but as it realy controls time, if over 100 you risk going too fast
for your system and Jerk will be 10 times more than set for example.. so I suppose if one
knows it will work you could go to liek 110% or may 140%, but 1000? ..yeah, that'd be fast
alright.. lol
Art
Re: getting the 57cnc to work with G540
I will check soon, 1000 hell everything X10
Re: getting the 57cnc to work with G540
Its all good art
Re: getting the 57cnc to work with G540
;D It's called pushing the limits of Trajectory Planning :o As Eddie Van Halen proved the Peavey electrical engineer that he could play his amplifiers on the volume 10!! From there came his signature Tone, Mine will be Auggie Flash.. It will feature a CanonMan (myself) and Art lighting the wick. lol... Naa.. I'm happy if I can go 1meter/second during contouring. lol
Re: getting the 57cnc to work with G540
if ya machine can do it why not watching a robodrill move is well scary
Who is online
Users browsing this forum: No registered users and 29 guests