Page 3 of 3

Re: auggie loss of comms

Posted: Tue Feb 11, 2020 8:05 am
by gburk
Art

I'm having a problem with the latest version of auggie posted..  i can't seem to make any movement, jogging doesn't move and also any commands entered in the mdi not working
g0 x1 nothing.. i want back to an older version 6.5 and all worked again..
The only message i get is get current com invalid. but not on every move attempt..

Gary

Re: auggie loss of comms

Posted: Tue Feb 11, 2020 11:06 am
by ArtF
Gary:

  Ill run some diagnostics here to see if I can see anything on the latest version.

Art

Re: auggie loss of comms

Posted: Tue Feb 11, 2020 12:15 pm
by gburk
Art

Thanks i did check the setting's and they are the same for the old version and new, doesn't seem like any configuration's setting's have changed

Gary

Re: auggie loss of comms

Posted: Sat Feb 22, 2020 10:50 am
by gburk
Art

Haven't herd anything were able to duplicate the issues i seem to be having with newest auggie version  ?.

Gary

Re: auggie loss of comms

Posted: Sat Feb 22, 2020 4:07 pm
by ArtF
Hi Gary:

  Sry for the delay, I think my last replay went missing.

I tested the current version by fresh install and then running several gcode programs, I couldn't find any issues.
Everything ran as expected. Are you still on the previous version?

Art

Re: auggie loss of comms

Posted: Sun Feb 23, 2020 11:19 am
by gburk
Art

Yes the previous version i did re download auggie a day or so ago and still had the same problem, so went back to the working version at least working for me..
tried it on 2 computers with same results.

Gary

Re: auggie loss of comms

Posted: Sun Feb 23, 2020 4:24 pm
by ArtF
Gary:

So it gives you no connection? Or did it connect but just gave no motion?
Are there any symptoms that might point me toward what it may be?  I cant
seem to make mine fail, it just runs the same as the previous version did.

Art

Re: auggie loss of comms

Posted: Mon Feb 24, 2020 12:44 pm
by gburk
Art

I will reinstall the newest version and get back to you maybe with a little more info.

Gary

Re: auggie loss of comms

Posted: Tue Feb 25, 2020 1:42 pm
by gburk
Art

I think the problem is in simulation mode gocde doesn't run right and jogging doesn't move the dro's hooked up the controlled and gcode and jogging working.. sorry
I always tested first in simulation mode.

Gary

Re: auggie loss of comms

Posted: Wed Feb 26, 2020 3:09 am
by ArtF
Gary:

Yeah, sorry, I should explain that simulation mode is trying to run the system on a virtual; pokeys, it assumes there is none actually
hooked up, so no real signals are sent. Its more a mode for people to test the program to see what it looks like.

Art