Page 1 of 1
Another clock
Posted: Fri May 05, 2017 6:46 am
by Dan Mauch
This piece was somewhat difficult because of all the tight curves. The yellow inserts were also a bit difficult because they are so small and again the many close curves that thin out the parts that hold them together. I just need the clock hand to finish it.
Dan Mauch
Re: Another clock
Posted: Sat May 06, 2017 8:20 am
by BobL
Nicely done Dan...
Cheers
Bob
:)
Re: Another clock
Posted: Wed May 10, 2017 3:48 pm
by ArtF
Good fitting on the pieces.. you have the kerf calcs down pat. Nice..
Art
Re: Another clock
Posted: Thu May 11, 2017 4:51 am
by Dan Mauch
Thanks. Indeed having the kerf cals down is the key. But what really helps is also that after designing the first section then making 11 exact copies for the array to fill the pattern makes it easier so that all the inlays are then identical after the offset for the kerf is applied.
Dan Mauch
ArtF wrote:
Good fitting on the pieces.. you have the kerf calcs down pat. Nice..
Art