Auggie Version 3.3 released.
Posted: Wed Feb 20, 2019 5:03 am
Hi All:
Auggie V2.3 is released to add Probing control for zeroing and such. The command
is either of
G31 XxYyZzAa Fff
G38 XxYyZzAa Fff
And a script control is available for inverting the probes default state.
GlobalSet("ProbeInvert", 1 or 0 );
The script command ex: Engine.GCode("G31Z-5F5"); is also
made available so that things like probing can be scripted.
Probing may be done in any vector direction, the resultant
hit point is not yet available to a script, so this is really just useful
for accurate zeroing.
Probing is new and lightly tested, please test in the air if you
value your probe tip. :)
Thx
Art
Auggie V2.3 is released to add Probing control for zeroing and such. The command
is either of
G31 XxYyZzAa Fff
G38 XxYyZzAa Fff
And a script control is available for inverting the probes default state.
GlobalSet("ProbeInvert", 1 or 0 );
The script command ex: Engine.GCode("G31Z-5F5"); is also
made available so that things like probing can be scripted.
Probing may be done in any vector direction, the resultant
hit point is not yet available to a script, so this is really just useful
for accurate zeroing.
Probing is new and lightly tested, please test in the air if you
value your probe tip. :)
Thx
Art