Version 3.01
Re: Version 3.01
The whitepaper link seems to be missing.
Amazing things are coming!
Kirk
Amazing things are coming!
Kirk
Re: Version 3.01
Hi Art,
You make my head spin just thinking of some of the things I might be able to do.
John
You make my head spin just thinking of some of the things I might be able to do.
John
1% inspiration 99% try, try again
Re: Version 3.01
Kirk:
The post was the white paper.. I use the term loosly when I get verbose on a topic.. :)
Art
The post was the white paper.. I use the term loosly when I get verbose on a topic.. :)
Art
Re: Version 3.01
I like that better than one of those 200 page buzzword filled official whitepapers anyway. Don't think you can read those on a screen instead of paper, and not sure what happens if you only have blue paper in your printer :)
Kirk
Kirk
Re: Version 3.01
Thought I'd show a couple of videos of what Art is working on.
I made a Pachinko machine to see how it might look/work
Happy Thanksgiving
https://www.youtube.com/watch?v=xmFHh_1qw7k
https://www.youtube.com/watch?v=ex0BnD7kA8o
I made a Pachinko machine to see how it might look/work
Happy Thanksgiving
https://www.youtube.com/watch?v=xmFHh_1qw7k
https://www.youtube.com/watch?v=ex0BnD7kA8o
Re: Version 3.01
here is a couple that shows a fun action
https://www.youtube.com/watch?v=_FC5eyW9aTk
https://www.youtube.com/watch?v=0xvS0bvou7o
https://www.youtube.com/watch?v=_FC5eyW9aTk
https://www.youtube.com/watch?v=0xvS0bvou7o
Last edited by Ya-Nvr-No on Sun Nov 27, 2016 8:52 am, edited 1 time in total.
Re: Version 3.01
Couple of videos showing motors in action
https://www.youtube.com/watch?v=a2A7Xvtudus
https://www.youtube.com/watch?v=-dfKaY-a1yM
https://www.youtube.com/watch?v=a2A7Xvtudus
https://www.youtube.com/watch?v=-dfKaY-a1yM
Re: Version 3.01
And to show how a couple of settings, can change the effected movements.
Note:The rack & pinion were Gearotic DXF generated, but the rack was altered in Autocad to add the slots.
https://www.youtube.com/watch?v=TkVk1j8cWpY
Good to see there is several views of these videos, shows there is a lot of interest in this adventure/feature.
Thanks Art, keep up the fun.
Note:The rack & pinion were Gearotic DXF generated, but the rack was altered in Autocad to add the slots.
https://www.youtube.com/watch?v=TkVk1j8cWpY
Good to see there is several views of these videos, shows there is a lot of interest in this adventure/feature.
Thanks Art, keep up the fun.
Re: Version 3.01
They are very cleaver
Re: Version 3.01
Looks like I'll have to start exploring the newer versions of Gearotics when I get back home from FL. Looking at the videos has given me a few ideas of what mechanisms I'd like to stimulate.
BillM
BillM
Re: Version 3.01
Hi Bill:
Probably 2-3 weeks till first release of the kinematics module. SO you have lots of time before
its out and we can begin to see just how usefull such a thing is. :) , Im trying to make it as accurate
as I can given the type of thing we'll need it to do.
Art
Probably 2-3 weeks till first release of the kinematics module. SO you have lots of time before
its out and we can begin to see just how usefull such a thing is. :) , Im trying to make it as accurate
as I can given the type of thing we'll need it to do.
Art
Re: Version 3.01
Hi Art
My wife &I have been in FL for the last couple of weeks helping my daughter and son-in-law with their newborn daughter (1mon. old).
I won't get back to CT for another couple of weeks, so I'll wait patiently for the updates.
BillM
My wife &I have been in FL for the last couple of weeks helping my daughter and son-in-law with their newborn daughter (1mon. old).
I won't get back to CT for another couple of weeks, so I'll wait patiently for the updates.
BillM
Re: Version 3.01
Bill:
Congratulations grandaddy. :)
Art
Congratulations grandaddy. :)
Art
Re: Version 3.01
Great designing! Cool stuff.
Dan
Dan
Re: Version 3.01
using a "Gearotic 1" eccentric gear and then adding motors to drive them in action, ;) just me playing.
https://www.youtube.com/watch?v=ncC0N-vj5b0
https://www.youtube.com/watch?v=ncC0N-vj5b0
Who is online
Users browsing this forum: No registered users and 1 guest