Welcome to Tickers..
Re: Welcome to Tickers..
Mistake :-[
I found a silly mistake in my video. I show set screws holding the shaft on the right side for the Vane Mech parts. Obviously this shaft needs to rotate on the bearings shown so there would not be any set screws on this shaft. Sorry about that!
BillJ
I found a silly mistake in my video. I show set screws holding the shaft on the right side for the Vane Mech parts. Obviously this shaft needs to rotate on the bearings shown so there would not be any set screws on this shaft. Sorry about that!
BillJ
Re: Welcome to Tickers..
Bill:
I noticed it, but figured given the quality of the result, I wasnt about to throw stones. :)
Art
I noticed it, but figured given the quality of the result, I wasnt about to throw stones. :)
Art
Re: Welcome to Tickers..
Ha! Yeah, I figured that would be hard to miss if you had built it much less designed it. I made an annotation in the video.
Thanks,
BillJ
Thanks,
BillJ
-
- Old Timer
- Posts: 5
- Joined: Thu Sep 23, 2010 12:28 am
Ready for the auction
I made the vid to show the ticker and a few other items I have just completed.
http://www.youtube.com/watch?v=9MwNwQc1gjo
Randy
http://www.youtube.com/watch?v=9MwNwQc1gjo
Randy
Re: Welcome to Tickers..
Randy:
As you had stainless hanging about, I had bronze ( my weight is squares of bronze..).
Excellent work all round, I hope the auction goes well. Let us know the results. Never know,
maybe Donald Trump will show up... :)
Art
As you had stainless hanging about, I had bronze ( my weight is squares of bronze..).
Excellent work all round, I hope the auction goes well. Let us know the results. Never know,
maybe Donald Trump will show up... :)
Art
Re: Welcome to Tickers..
Randy;
Nice collection of items, hope you do well in the auction.
Cheers
Bob ;)
Nice collection of items, hope you do well in the auction.
Cheers
Bob ;)
Gearotic Motion
Bob
Bob
Re: Ready for the auction
The A&M Texas is on top of the UT Texas... I approve.. =) Those look very nice btw.masterbrew wrote: I made the vid to show the ticker and a few other items I have just completed.
http://www.youtube.com/watch?v=9MwNwQc1gjo
Randy
- Pal
One ticker done...
My first "Ticker". May there be many more ;D
It still needs a little work. But I don't think that it turned out to shabby.
Hopefully the video works. This will be my first video upload of any kind.
http://youtu.be/F2suQpGurc8
Art, thank you for such a wonderful and fun program!
Brian
It still needs a little work. But I don't think that it turned out to shabby.
Hopefully the video works. This will be my first video upload of any kind.
http://youtu.be/F2suQpGurc8
Art, thank you for such a wonderful and fun program!
Brian
Re: Welcome to Tickers..
Brian, your video is private and unviewable. Change it to public, or whatever they call viewable if you have the link; too early to remember the name :)
Kirk
Kirk
Re: Welcome to Tickers..
Brian:
Looking forward to seeing it, but you need to go to your youtube manager and select the "share" button
for that video. Its private only. :)
Art
Looking forward to seeing it, but you need to go to your youtube manager and select the "share" button
for that video. Its private only. :)
Art
Re: Welcome to Tickers..
Brian;
Nicely done... Is that amber acrylic?
Cheers
Bob
;)
Nicely done... Is that amber acrylic?
Cheers
Bob
;)
Gearotic Motion
Bob
Bob
Re: private video
Sorry. I thought I had unchecked that. Hopefully it works now.
Brian
Brian
Re: Welcome to Tickers..
Hey I like it, I didnt think acrylic would lend itself to that type of sculpture but it
fits pretty well, warm looking.
Art
fits pretty well, warm looking.
Art
Re: Acrylic ticker
Thanks. Yeah it's amber, I had some scrap acrylic laying around so I though I would test it with that first, But I think wood definitely looks better.
Although its time to start getting ready for bazaar season, I thought maybe some dancing elves, or a couple of reindeer and a sleigh on the veins. People like gaudy things at events like that.
Brian
Although its time to start getting ready for bazaar season, I thought maybe some dancing elves, or a couple of reindeer and a sleigh on the veins. People like gaudy things at events like that.
Brian
Re: Welcome to Tickers..
Hi All,
Here is my first attempt at Scimitar. As I don't have a CNC (yet, :) everything was cut with a scroll saw. I'm trying to get it to run with just the arms on. there is about 1.5 lbs on the weight wheel. when i manually flick the vane assy. it only moves a small bit in the counterclockwise direction. The shaft is free wheeling. Any ideas why it is not rotating as it should? see this you tube link. https://www.youtube.com/watch?v=NLKw2Zu ... e=youtu.be
thanks,
Carlton
Here is my first attempt at Scimitar. As I don't have a CNC (yet, :) everything was cut with a scroll saw. I'm trying to get it to run with just the arms on. there is about 1.5 lbs on the weight wheel. when i manually flick the vane assy. it only moves a small bit in the counterclockwise direction. The shaft is free wheeling. Any ideas why it is not rotating as it should? see this you tube link. https://www.youtube.com/watch?v=NLKw2Zu ... e=youtu.be
thanks,
Carlton
Who is online
Users browsing this forum: No registered users and 24 guests